HANDITRAP II™ VOD RECORDER :
EXPLOSIVES CONSUMERS
You are paying for explosives to provide you with the energy your blasts need under your specific blasting conditions. The
HandiTrap II™ VOD Recorder is used by mines and quarries to perform spot checks of explosives performance during blasts to compare the actual VOD results to the VOD specification published by the explosives manufacturer.

EXPLOSIVES MANUFACTURERS
Your customers depend on you for their explosives. At explosives plants, the HandiTrap II™ VOD Recorder is used as part of the quality control process to test the VOD performance of samples of explosives including cartridges, boosters, detonating cord, bulk explosives of all types, and military explosives. At the customer's blast site, technicians providing in-hole delivery of explosives use the HandiTrap II™ VOD Recorder to proactively document the VOD performance of the explosives being sold to the customer.

MICROTRAP™ VOD/DATA RECORDER :
Velocity of detonation (VOD) is cited as the performance specification for explosives. If you are not measuring VOD then you cannot be sure that your explosives are performing properly.
If you want to profile the VOD continuously along the explosives columns in multiple blastholes, along an explosives sample, or determine the delay times between blastholes, the most affordable and easiest to use recorder is the MicroTrap™ VOD/Data Recorder. It is the World's most popular VOD recorder and can be optionally extended to record any sensor that outputs DC voltage such as pressure sensors and accelerometers.

EXPLOSIVES CONSUMERS
You are paying for explosives and delay detonators to provide you with the energy and timing your blasts need under your specific blasting conditions. The MicroTrap™ VOD/Data Recorder is used by mines and quarries to perform spot checks of explosives and detonator delay time performance during blasts to compare the actual VOD and delay time results to the specifications published by the explosives manufacturer.

EXPLOSIVES MANUFACTURERS
Your customers depend on you for their explosives and detonators. At the customer's blast site the MicroTrap™ VOD/Data Recorder is used by your technical service representative to document the VOD performance of the explosives and delay times of the delay detonators being sold to the customer. At explosives plants, the MicroTrap™ VOD/Data Recorder is used as part of the quality control process to test VOD, airblast overpressure, or underwater pressure of samples of explosives including cartridges, boosters, detonating cord, bulk explosives of all types, and military explosives.

BLASTCAM™ HIGH SPEED CAMERA :
If you want to determine the effects of blasts on structures or vehicles or determine the actual firing times of your blastholes and the nature of the rock movement, the digital video camera with the light sensitivity, speed and resolution to accurately capture these events is the BlastCam™ High Speed Camera. It is a complete high speed video recording system with an easy-to-use operator interface and the ability to self-trigger for unattended recording without the need to run external trigger wires..

BLASTCAM™ HIGH SPEED CAMERA :
Blasts and their effects occur too quickly to be captured with standard speed video cameras. To see what you've been missing - you must record your blasts with high speed video.
If you want to determine the effects of blasts on structures or vehicles or determine the actual firing times of your blastholes and the nature of the rock movement, the digital video camera with the light sensitivity, speed and resolution to accurately capture these events is the BlastCam™ High Speed Camera. It is a complete high speed video recording system with an easy-to-use operator interface and the ability to self-trigger for unattended recording without the need to run external trigger wires.

EXPLOSIVES CONSUMERS AND MANUFACTURERS :
Your delay detonators must provide the timing blasts need under your specific blasting conditions. Blastholes firing at incorrect times reduce rock fragmentation, effect blast movement, and can increase blast vibrations. The BlastCam™ High

PWT™ PORTABLE WIRELESS TRIGGER. :
PWT™ PORTABLE WIRELESS TRIGGER.
An external trigger signal is often the only way to inform an instrument of the correct time to begin recording an event of interest. Many situations make transmission of the trigger signal by cable to the instrument virtually impossible.
If you want to transmit trigger commands to your instrumentation either manually from your remote location, or automatically from the event being recorded, over long distances, or across difficult terrain, then the most practical triggering solution is the PWT™ Portable Wireless Trigger.
MANUAL TRIGGERING
Typically the PWT™ Transmitter is located close to or with the Operator. The PWT™ Push Button Switch is attached to the Normally Open (NO) connector on the PWT™ Transmitter. The PWT™ Receiver is located at a remote location from the Operator near the instrument and connected to the external trigger input of the instrument. When the Operator pushes the PWT™ Push Button Switch the PWT™ Transmitter sends a coded trigger signal wirelessly to the PWT™ Receiver which relays the trigger signal to the instrument.
AUTOMATED TRIGGERING
Typically the PWT™ Transmitter is located close to the event being recorded. A short trigger line or TTL signal line is connected between the event and the PWT™ Transmitter. The PWT™ Receiver is located at a remote location from the event near the instrument and connected to the external trigger input of the instrument. When the trigger signal is received at the PWT™ Transmitter it sends a coded trigger signal wirelessly to the PWT™ Receiver which relays the trigger signal to the instrument..

Vibracord DX Digital Vibration Meter :
The family of vibration measuring instruments Vibracord DX is used in construction work, mining, blasting, demolition or other works where vibrations cannot be completely avoided. To exclude any damage or risk, measurement and analysis of these vibrations are required.
Depending on the chosen transducers The equipment fulfills with the requirements of the different regulations :
1-315 Hz (DIN 45669)
2-250 Hz.

MODEM & LAN OPTIONS :
The optional modem and LAN options offer the following benefits to the equipment:
● Send SMS text messages with the data results of the record to the desired mobile phone (only with modem option).
● Remote control of the configuration parameters of the equipment with a WEB - based application (no special software required).
● Access to the data from your mobile phone or computer.
● Receive an e-mail to your account with the data of the record.
● FTP server for a fast and easy data transfer.
● Synchronization with an external time server (NTP protocol). This option allows the system clock of the equipment to stay accurate, with a maximum error of miliseconds..